Wrapping your bike handlebars is a straightforward however efficient means to enhance your driving expertise. It might probably present additional consolation, grip, and elegance. For those who’re new to wrapping handlebars, don’t fret – it is a comparatively simple course of that may be accomplished in a couple of hours. On this article, we’ll stroll you thru the steps of how you can wrap bike handlebars like a professional.
Earlier than you begin, you will want to collect a couple of provides. You may want a roll of handlebar tape, a pair of scissors, and a small quantity of rubbing alcohol. You might also wish to use a hair dryer to assist the tape adhere higher. After you have your provides, you are prepared to begin wrapping.
Step one is to scrub your handlebars. This can assist the tape adhere higher. Use a small quantity of rubbing alcohol on a clear rag to wipe down the bars. As soon as the bars are clear, you can begin wrapping the tape. Begin by putting the top of the tape within the heart of the handlebar. Then, wrap the tape across the bar, overlapping every layer by about half an inch. As you wrap, you’ll want to preserve the tape tight and even. Once you attain the top of the handlebar, use the scissors to chop the tape after which tuck the top below the earlier layer.
Overlapping the Tape
To create a snug and safe grip, overlapping the handlebar tape is essential. Comply with these steps meticulously:
1. Begin with the Left Aspect:
Start by putting the tape’s finish on the left finish of the handlebar, roughly 1 inch from the sting. Safe it with electrical tape or glue.
2. Wrap Away from the Physique:
Wind the tape away from you, preserving it taut however not too tight. Intention for an overlap of roughly 1/2 to 1 inch on every wrap.
3. Anchor the Tape:
When you attain the top of the handlebar, fold the tape over itself and safe it with a couple of wraps {of electrical} tape.
4. Begin the Proper Aspect:
Repeat the method on the suitable facet, beginning on the periphery and wrapping in direction of the middle of the handlebar.
5. Overlap the Center:
When the right-side tape reaches the center of the handlebar, overlap it barely over the left-side tape. Use 4 to six wraps to firmly safe the overlap. This creates a “bullhorn” form that enhances grip and luxury.
| Wrap Layers | Beginning Place | Ending Place | Overlap |
|---|---|---|---|
| 1-2 | Left finish | Proper finish | 1/2 – 1 inch |
| 3-4 | Proper finish | Center | 1/2 – 1 inch |
| 5-6 | Center | Left facet | 4 – 6 wraps |
How To Wrap Bike Handlebars
Wrapping your bike handlebars is a good way to enhance the consolation and elegance of your bike. It is also a comparatively simple and cheap venture that you are able to do your self with a couple of fundamental instruments. Listed here are the steps on how you can wrap bike handlebars:
-
Collect your supplies. You will have the next supplies to wrap your bike handlebars:
- Bar tape
- Electrical tape
- Scissors
- A Phillips head screwdriver
- A hex key
- A torque wrench (non-obligatory)
-
Take away the previous bar tape. In case your handlebars are already wrapped, you will want to take away the previous bar tape earlier than you’ll be able to wrap new tape on. To do that, use a Phillips head screwdriver to take away the brake lever clamps and the shifter clamps. Then, fastidiously peel off the previous bar tape.
-
Clear the handlebars. As soon as the previous bar tape is eliminated, clear the handlebars with a moist fabric to take away any filth or particles.
-
Wrap {the electrical} tape. Begin by wrapping electrical tape across the handlebars, beginning on the heart and dealing your means out in direction of the ends. Wrap {the electrical} tape tightly and overlap every layer by about half. {The electrical} tape will assist to guard the handlebars from the damage and tear of the bar tape.
-
Wrap the bar tape. Begin by wrapping the bar tape on the heart of the handlebars, overlapping {the electrical} tape by about half. Wrap the bar tape tightly and overlap every layer by about half. Proceed wrapping the bar tape till you attain the top of the handlebars.
-
Safe the bar tape. As soon as the bar tape is wrapped, use electrical tape to safe it in place. Begin by wrapping {the electrical} tape across the handlebars on the heart, after which work your means out in direction of the ends. Wrap {the electrical} tape tightly and overlap every layer by about half.
-
Reinstall the brake lever clamps and the shifter clamps. As soon as the bar tape is secured, reinstall the brake lever clamps and the shifter clamps. Tighten the clamps utilizing a torque wrench to the producer’s specs.
-
Get pleasure from your newly wrapped handlebars! Your bike handlebars at the moment are wrapped and able to journey.
Folks Additionally Ask About How To Wrap Bike Handlebars
How usually ought to I wrap my bike handlebars?
You need to wrap your bike handlebars each time they begin to present indicators of wear and tear and tear. This might be as a result of bar tape turning into frayed, torn, or soiled. For those who journey your bike steadily, it’s possible you’ll have to wrap your handlebars each few months or so.
What kind of bar tape ought to I take advantage of?
There are various various kinds of bar tape obtainable, every with its personal distinctive properties. Among the hottest kinds of bar tape embrace:
* Cork tape: Cork tape is a pure materials that’s snug to grip and absorbs vibrations.
* Artificial tape: Artificial tape is produced from a wide range of supplies, together with rubber, plastic, and foam. Artificial tape is usually extra sturdy than cork tape, but it surely will also be much less snug to grip.
* Leather-based tape: Leather-based tape is an expensive materials that’s each snug to grip and sturdy. Nevertheless, leather-based tape will be costlier than different kinds of tape.
How do I select the suitable dimension bar tape?
The width of the bar tape ought to match the width of your handlebars. You’ll be able to measure the width of your handlebars by measuring the gap between the 2 ends of the handlebars. As soon as you already know the width of your handlebars, you’ll be able to select the suitable dimension bar tape.
