If you happen to’re a PC gamer, that your graphics card is without doubt one of the most vital parts in your system. It is chargeable for rendering the pictures you see in your display screen, and a great graphics card could make a giant distinction in your gaming expertise. However what occurs in case your graphics card begins to fail? Or if you wish to improve to a brand new mannequin? In that case, you may have to know learn how to take out your outdated graphics card.
Eradicating a graphics card is a comparatively easy course of, however there are some things you want to do to ensure it goes easily. First, you may have to energy down your pc and unplug it from the ability outlet. Then, open up your pc case and find the graphics card. It is going to be an extended, slender card with a fan or warmth sink on it. As soon as you’ve got discovered the graphics card, you may have to take away the screws which can be holding it in place. Watch out to not lose these screws, as you may want them to reinstall the cardboard later.
As soon as the screws are eliminated, you may gently pull the graphics card out of its slot. Watch out to not injury the cardboard or the slot. As soon as the cardboard is out, you may disconnect the ability cables from it. Lastly, you may take away the graphics card out of your pc case. Now that you’ve got eliminated your outdated graphics card, you may set up your new one. The method is actually the identical in reverse. First, insert the brand new card into the slot. Then, safe it with the screws. Lastly, join the ability cables to the cardboard. As soon as the cardboard is put in, you may energy in your pc and begin gaming.
[Image of a graphics card being removed from a computer case]
Disconnect Energy and Peripherals
Earlier than you begin, it is vital to take some security precautions to forestall any injury to your parts. First, make sure that your pc is turned off and unplugged from the ability outlet. Subsequent, floor your self by touching a metallic object, resembling a doorknob or water faucet. This may assist to discharge any static electrical energy that would injury your graphics card.
When you’re grounded, it is time to begin disconnecting the ability and peripherals out of your graphics card. To do that, comply with these steps:
- Find the ability connectors on the graphics card. They are going to be positioned on the highest or facet of the cardboard, and they’ll usually be both 6-pin or 8-pin connectors.
- Unplug the ability connectors from the graphics card. To do that, merely press down on the discharge latch on the connector and pull it straight out.
- Disconnect any peripherals which can be linked to the graphics card. This contains any displays, HDMI cables, or different units.
As soon as you’ve got disconnected the ability and peripherals out of your graphics card, you may proceed to the following step of the removing course of.
Take away Case Aspect Panel
Earlier than you start, make sure that to energy down your pc and unplug it from the ability outlet. Additionally, you will have to discharge any static electrical energy by touching a metallic object, resembling the pc case. Find the facet panel screws on the again of the case and take away them.
1. Determine the Aspect Panel
The facet panel is usually product of metallic or plastic and is held in place by screws. Find the screws that maintain the facet panel in place. They’re often positioned on the again of the case.
2. Take away the Screws
Use a screwdriver to take away the screws that maintain the facet panel in place. Watch out to not drop the screws or lose them.
3. Elevate the Panel
As soon as the screws are eliminated, elevate the facet panel up and away from the case. Watch out to not injury the panel or the parts contained in the case.
4. Slide the Panel Ahead
In some instances, it’s possible you’ll want to slip the facet panel ahead earlier than lifting it up. It’s because the panel could also be held in place by a lip or groove on the entrance of the case.
5. Take away the Panel
As soon as the facet panel has been eliminated, you’ll have entry to the parts contained in the case. Now you can proceed with the remainder of the directions.
Find the Graphics Card
To start, you want to find the graphics card inside your pc. This is learn how to do it:
- Determine the enlargement slots: Open the pc case and find the enlargement slots on the motherboard. These slots are usually lengthy and skinny, with a plastic or metallic clip on the finish. You may often discover them in the direction of the underside of the motherboard.
- Discover the graphics card slot: Among the many enlargement slots, you may see a slot that is wider and longer than the others. That is the slot for the graphics card.
- Find the graphics card: The graphics card is usually the most important and most noticeable element put in on this slot. It can have a big metallic heatsink and cooling followers on high. It might even have a number of video outputs on the again of the pc, resembling HDMI or DisplayPort.
| Graphics Card Slot | Description |
|---|---|
| PCIe x16 | Commonest slot for contemporary graphics playing cards |
| AGP | Older slot used for graphics playing cards earlier than PCIe |
| PCI | Even older slot, not generally used for graphics playing cards |
Test for the Launch Latch
The discharge latch is a small lever or button that secures the graphics card in its slot. It’s often positioned on the tip of the cardboard, close to the again of the pc case. To launch the latch, merely push down or pull it again. This may disengage the cardboard from the slot and permit you to take away it.
Sorts of Launch Latches
There are two foremost varieties of launch latches:
1. Push-down latch: This sort of latch is launched by pushing down on the lever. It’s the most typical sort of launch latch discovered on graphics playing cards.
2. Pull-back latch: This sort of latch is launched by pulling again on the lever. It’s much less widespread than the push-down latch.
You may often inform which sort of latch your graphics card has by wanting on the finish of the cardboard. If there’s a small button or lever that may be pushed down, then it’s a push-down latch. If there’s a lever that may be pulled again, then it’s a pull-back latch.
| Launch Latch Kind | Motion |
|---|---|
| Push-down latch | Push down on the lever |
| Pull-back latch | Pull again on the lever |
Fastidiously Press Down on the Latch
After you have positioned the latch, it is time to fastidiously press down on it. This is a extra detailed information on how to do that:
-
Use your thumb to find the latch on the facet of the graphics card. It is often a small, plastic lever that must be pushed down.
-
Gently apply downward strain to the latch. Don’t use extreme pressure, as this might injury the graphics card.
-
Maintain the latch down whilst you gently pull the graphics card out of the PCIe slot.
-
As soon as the graphics card is evident of the slot, elevate it up and out of the pc case.
-
Place the graphics card in an anti-static bag for safekeeping till you might be prepared to put in it in a brand new pc.
Security Tip: All the time deal with graphics playing cards with care to keep away from damaging the fragile parts.
| Latch Location | Latch Motion |
|---|---|
| Aspect of graphics card | Push down |
| PCIe slot | Pull out |
Unplug Energy Cables
Earlier than you may take away the graphics card, you need to unplug the ability cables which can be linked to it. These cables are often positioned on the high or facet of the cardboard. They’re usually black or blue in shade, and so they could have 6 or 8 pins. If you want to take out an 8 pin pcie energy cable, you need to press a launch tab first, then disconnect the ability cable. If you wish to detach 6 pin pcie, you do not have to press any buttons – simply pull the cable firmly and the ability can be lower off.
As soon as the ability cables are unplugged, you may transfer on to the following step.
| Variety of Pins | Launch Tab |
|---|---|
| 8 | Sure |
| 6 | No |
Pull the Graphics Card Straight Up
As soon as the graphics card is disconnected, it ought to be lifted straight up and out of the enlargement slot. Use even strain on each side of the graphics card to keep away from bending or damaging it. It might be essential to wiggle the graphics card barely to loosen it earlier than pulling it straight up.
Watch out to not contact the gold contacts on the underside of the graphics card, as this might injury it. If the graphics card is caught, don’t pressure it. Attempt wiggling it gently to loosen it, and if that does not work, seek the advice of the motherboard handbook or a certified technician for help.
As soon as the graphics card is eliminated, examine it for any injury. If there’s any injury, don’t set up the graphics card in one other pc. Contact the producer of the graphics card for help.
Listed below are some further ideas for pulling the graphics card straight up:
- Use a tender fabric or anti-static mat to keep away from damaging the graphics card.
- Maintain the graphics card by the perimeters, not the center.
- Pull the graphics card straight up, don’t twist or bend it.
- If the graphics card is caught, don’t pressure it. Attempt wiggling it gently to loosen it.
- In case you are not sure learn how to take away the graphics card, seek the advice of the motherboard handbook or a certified technician for help.
- Energy down your pc and unplug it from the ability outlet.
- Open the case by eradicating the screws on the again.
- Find the graphics card. It is going to be an extended, skinny card with a fan on it.
- Disconnect the ability cables from the graphics card.
- Press down on the discharge tab on the finish of the graphics card slot.
- Pull the graphics card straight up and out of the slot.
- No show in your monitor
- Artifacts or different visible glitches in your display screen
- Your pc freezing or crashing
| Step | Description |
|---|---|
| 1. | Disconnect the ability cables from the graphics card. |
| 2. | Find the discharge lever on the enlargement slot. |
| 3. | Press the discharge lever to unlock the graphics card. |
| 4. | Grasp the graphics card by the perimeters. |
| 5. | Pull the graphics card straight up and out of the enlargement slot. |
| 6. | Examine the graphics card for any injury. |
| 7. | If there’s any injury, don’t set up the graphics card in one other pc. Contact the producer of the graphics card for help. |
Maintain the Graphics Card Securely
As soon as the cables are disconnected, firmly grasp the graphics card by its edges, being cautious to not contact the uncovered gold contacts on the PCIe connector or the backplate (if any).
Ideas for Dealing with the Graphics Card:
| Ideas |
|---|
| Keep away from touching the gold contacts on the PCIe connector. |
| Deal with the cardboard by the perimeters, not the center. |
| Watch out to not bend the cardboard. |
| If potential, use an anti-static wrist strap. |
With the graphics card securely in hand, gently pull it straight up and out of the PCIe slot. Don’t apply extreme pressure or tilt the cardboard, as this might injury the slot or the PCIe connector on the graphics card itself.
Insert into New Machine (for Set up)
1. Open the case
Step one is to open the case of your pc. That is often executed by eradicating the screws that maintain the facet panel in place. As soon as the facet panel is eliminated, you’ll have entry to the within of your pc.
2. Find the PCIe slot
The subsequent step is to find the PCIe slot in your motherboard. That is often an extended, slender slot that’s positioned close to the highest of the motherboard. The PCIe slot can have a small metallic latch on one finish.
3. Insert the graphics card
After you have positioned the PCIe slot, you may insert the graphics card. To do that, first align the graphics card with the slot. Then, press down on the graphics card till it clicks into place. The metallic latch will lock the graphics card in place.
4. Safe the graphics card
As soon as the graphics card is inserted, you want to safe it. That is often executed by screwing in two screws which can be positioned on the again of the graphics card. These screws will assist to maintain the graphics card in place and forestall it from coming free.
5. Shut the case
As soon as the graphics card is safe, you may shut the case of your pc. To do that, merely substitute the facet panel and screw it again into place.
6. Set up drivers
As soon as the graphics card is put in, you want to set up the drivers. The drivers are software program that enables your pc to speak with the graphics card. You may often obtain the drivers from the web site of the graphics card producer.
7. Restart your pc
As soon as the drivers are put in, you want to restart your pc. This may enable the modifications to take impact.
8. Take a look at the graphics card
As soon as your pc has restarted, you may take a look at the graphics card. To do that, you may run a graphics-intensive program or sport. If the graphics card is working correctly, you will notice a big enchancment in graphics high quality.
9. Troubleshooting
In case you are having issues along with your graphics card, there are some things you are able to do:
| Drawback | Resolution |
|---|---|
| No show | Ensure that the graphics card is correctly seated within the PCIe slot. Additionally, guarantee that the ability provide is linked to the graphics card. |
| Poor efficiency | Ensure that the drivers for the graphics card are put in. Additionally, attempt updating the BIOS of your motherboard. |
| Artifacts | Artifacts are visible distortions that may seem on the display screen when the graphics card will not be working correctly. If you happen to see artifacts, attempt reseating the graphics card within the PCIe slot. |
Reinstall Aspect Panel and Energy On
10. **Reinstall the facet panel.**
As soon as the graphics card is securely in place, it is time to reinstall the facet panel. Ensure that the facet panel is correctly aligned and that every one the screws are tightened securely.
11. **Energy on the pc.**
As soon as the facet panel is in place, you may energy on the pc. The pc ought to now boot up usually and the brand new graphics card ought to be detected routinely.
12. **Test the machine supervisor.**
To confirm that the brand new graphics card is working correctly, you may test the machine supervisor. In Home windows, you may open the machine supervisor by urgent the Home windows key + X and deciding on “Machine Supervisor.” Within the machine supervisor, broaden the “Show adapters” part and confirm that your new graphics card is listed.
13. **Set up the drivers.**
After you have verified that the brand new graphics card is working correctly, you want to set up the drivers. The drivers to your graphics card can often be discovered on the producer’s web site. Obtain the drivers and set up them based on the producer’s directions.
14. **Restart the pc.**
As soon as the drivers are put in, you want to restart the pc. The pc ought to now boot up usually and the brand new graphics card ought to be totally practical.
How To Take A Graphics Card Out
Taking out a graphics card could appear to be a frightening job, however it’s truly fairly easy. Listed below are the steps on learn how to do it:
