Folding your Tommy Bahama chair shouldn’t be a tough job, however it does require a little bit of observe. However when you get the grasp of it, you can fold it down in seconds. Listed below are the steps on how you can do it:
First, be sure that the chair is totally open. Then, seize the 2 aspect arms of the chair and pull them in direction of one another. It will trigger the chair to begin to fold in half. As soon as the chair is midway folded, you possibly can then push down on the seat of the chair to finish the fold.
To unfold the chair, merely reverse the steps. Pull the 2 aspect arms of the chair aside till it’s fully open. Then, push down on the seat of the chair to lock it into place. With a little bit observe, you can fold and unfold your Tommy Bahama chair very quickly.
Unlocking the Mechanism
The Tommy Bahama chair incorporates a distinctive locking mechanism that retains it securely in place when open. To shut the chair, you will have to first unlock this mechanism. This is an in depth information:
- Find the discharge lever: The discharge lever is often positioned on the aspect of the chair, close to the underside. It is often a small, lever-like button or knob.
- Determine the latch: On the alternative aspect of the chair, you will see a latch that engages with the discharge lever. This latch is what retains the chair locked in place.
- Push the discharge lever: Whereas holding the latch in place, push the discharge lever upwards. It will disengage the latch, permitting you to shut the chair.
Detaching the Body
To detach the body from the bottom, find the 4 latches on the corners of the chair. These latches are sometimes black and product of plastic. Use a screwdriver or a coin to press down on the latch and raise it up. The body ought to now be free from the bottom.
As soon as the latches are launched, rigorously raise the body off the bottom. Watch out to not pinch your fingers or injury the body.
In case you are having issue detaching the body, strive utilizing a lubricant reminiscent of WD-40 on the latches. Alternatively, you possibly can contact Tommy Bahama customer support for help.
Desk of Latches
| Latch Location | Directions |
|---|---|
| High left nook | Use a screwdriver or a coin to press down on the latch and raise it up. |
| High proper nook | Use a screwdriver or a coin to press down on the latch and raise it up. |
| Backside left nook | Use a screwdriver or a coin to press down on the latch and raise it up. |
| Backside proper nook | Use a screwdriver or a coin to press down on the latch and raise it up. |
Eradicating the Cloth
First, flip the chair the other way up. Find the small screws which might be holding the material in place and take away them utilizing a screwdriver. As soon as the screws are eliminated, you possibly can rigorously raise the material off the body of the chair. Watch out to not tear the material as you take away it.
| Step | Description |
|---|---|
| 1 | Flip the chair the other way up. |
| 2 | Find the small screws which might be holding the material in place. |
| 3 | Take away the screws utilizing a screwdriver. |
| 4 | Fastidiously raise the material off the body of the chair. |
Subsequent, you could take away the previous material from the cushions. To do that, merely unzip the cushions and take away the previous material. Watch out to not injury the cushions as you take away the material.
Inspecting the Parts
Earlier than trying to shut your Tommy Bahama chair, it is important to totally examine the elements to make sure they’re in good working order. Listed below are the important thing components to test:
Body and Cloth
Examine the chair’s body for any indicators of harm or rust. Be certain that all connections are safe and there aren’t any unfastened bolts or screws. Additionally, test the material for any tears, stains, or fading. If any injury is discovered, it ought to be addressed earlier than closing the chair.
Cushions
Study the cushions for any lumps, indentations, or lack of help. Ensure that the cushions are securely connected to the chair and that there aren’t any unfastened or lacking buttons or zippers.
Locking Mechanism
Find the locking mechanism accountable for retaining the chair open. Be certain that it’s functioning appropriately and that the locking pins are securely engaged. If the mechanism shouldn’t be working correctly, it might stop the chair from closing safely.
Different Parts
Along with the above, examine all different elements of the chair, together with the armrests, footrest, and any equipment. Ensure that every part is in good situation and correctly connected.
| Element | What to Examine |
|---|---|
| Body | Harm, rust, unfastened bolts |
| Cloth | Tears, stains, fading |
| Cushions | Lumps, indentations, safe attachment |
| Locking Mechanism | Functioning appropriately, locking pins engaged |
| Armrests | Good situation, correctly connected |
| Footrest | Good situation, correctly connected |
| Equipment | Correctly connected, good situation |
Tightening Unfastened Joints
Over time, the joints of your Tommy Bahama chair might grow to be unfastened. This may be attributable to quite a lot of components, reminiscent of put on and tear, publicity to the weather, or just the passage of time. Unfastened joints could make your chair unstable and uncomfortable to sit down in. Luckily, tightening unfastened joints is a comparatively easy job that may be accomplished in a couple of minutes with the correct instruments.
To tighten unfastened joints, you have to the next instruments:
| Device | Description |
|---|---|
| Allen wrench | A small wrench with a hexagonal head |
| Screwdriver | A small screwdriver with a flat head |
| Hammer | A small hammer |
Upon getting gathered your instruments, comply with these steps to tighten unfastened joints in your Tommy Bahama chair:
1. Examine the chair to determine the unfastened joints. Search for joints which might be wobbly or have gaps between the items of wooden.
2. Use the Allen wrench to tighten the bolts or screws which might be holding the unfastened joints collectively. Flip the wrench clockwise till the joint is comfortable.
3. If the joint continues to be unfastened, use the screwdriver to tighten the screws which might be holding the joint collectively. Flip the screwdriver clockwise till the joint is comfortable.
4. If the joint continues to be unfastened, use the hammer to softly faucet the joint again into place. Watch out to not hit the joint too exhausting, as this might injury the wooden.
5. As soon as the joint is tight, use a moist fabric to wipe away any dust or particles from the joint. It will assist to forestall the joint from loosening once more sooner or later.
Lubricating Shifting Components
Lubricating shifting elements is crucial to make sure clean and correct functioning of your Tommy Bahama chair, in addition to to forestall untimely put on and tear. To do that, you have to a silicone-based lubricant or a lubricant particularly designed for outside furnishings. Earlier than making use of any lubricant, clear all shifting elements with a moist fabric to take away any dust or particles.
As soon as the elements are clear, apply a small quantity of lubricant to every shifting half, reminiscent of hinges, joints, and swivel mechanisms. Use a cotton swab or a small brush to use the lubricant evenly, being cautious to not over-lubricate. Wipe away any extra lubricant to forestall attracting dust and particles.
The next desk gives an in depth information on which particular shifting elements to lubricate:
| Shifting Half | Location |
|---|---|
| Hinges | The place the backrest connects to the seat |
| Joints | The place the arms hook up with the backrest and seat |
| Swivel Mechanism | Beneath the seat, the place the chair rotates |
| Gliders | On the underside of the legs, if relevant |
By following these steps and lubricating shifting elements commonly, you possibly can maintain your Tommy Bahama chair working easily and prolong its lifespan.
Reassembling the Body
As soon as the body is disassembled, it is time to put it again collectively. Listed below are the steps:
1. Insert the Again Relaxation
Align the again relaxation with the corresponding slots on the aspect panels. Slide the again relaxation into place till it snaps securely.
2. Connect the Seat Again
Lay the seat again on high of the body and align the holes with the bolts on the aspect panels. Insert the bolts and tighten them with a wrench.
3. Set up the Armrests
Connect the armrests to every aspect of the chair body. Use the screws offered to safe them.
4. Insert the Seat
Place the seat on high of the body and safe it with the screws offered.
5. Add the Again Cushion
Place the again cushion on high of the again relaxation and connect it with the straps or Velcro offered.
6. Connect the Seat Cushion
Place the seat cushion on high of the seat and connect it with the straps or Velcro offered.
7. Tighten the {Hardware}
Utilizing a wrench or screwdriver, tighten all of the nuts and bolts to make sure the chair is sturdy and safe. Pay particular consideration to the bolts connecting the seat again to the aspect panels, as these bear probably the most weight.
| Device | Use |
|---|---|
| Wrench | Tightening bolts |
| Screwdriver | Tightening screws |
Congratulations! You will have now efficiently reassembled your Tommy Bahama chair.
Reattaching the Cloth:
8. Hooking the Cloth Again into Place
**Detailed Steps:**
| Step | Directions |
|---|---|
| a) | Find the metallic hooks connected to the body across the edges of the chair. |
| b) | Fold the material edges again, revealing the plastic spikes on the again of the material. |
| c) | Align the plastic spikes with the metallic hooks. The spikes ought to match snugly into the hooks. |
| d) | Maintain the material taut whilst you hook every spike into its corresponding hook. |
| e) | Pull the material firmly and distribute it evenly across the body. |
| f) | Safe the material with the offered bungee cords or leather-based straps. |
**Ideas:**
- Use a flashlight that can assist you see contained in the chair body.
- If the material does not match snugly, alter the bungee cords or leather-based straps.
- Be affected person and take your time to make sure the material is securely connected.
Locking the Mechanism
The Tommy Bahama chair has a novel locking mechanism that secures the chair in a reclined place. To lock the mechanism, merely push down on the lever positioned on the correct aspect of the chair, close to the bottom of the backrest. You’ll hear a click on when the mechanism is engaged. As soon as locked, the chair will stay within the reclined place till you unlock it.
Unlocking the Mechanism
To unlock the mechanism, merely raise up on the lever positioned on the correct aspect of the chair, close to the bottom of the backrest. You’ll hear a click on when the mechanism is disengaged. As soon as unlocked, the chair might be moved again to the upright place.
Adjusting the Recline Angle
The Tommy Bahama chair might be reclined to any angle as much as 170 levels. To regulate the recline angle, merely lean again within the chair and use your weight to regulate the angle. The chair will stay within the place you select till you alter it once more.
Securing the Chair
To make sure that the chair is safe within the reclined place, you will need to lock the mechanism. It will stop the chair from shifting again to the upright place in the event you lean again too far.
Disengaging the Mechanism
To disengage the mechanism, merely raise up on the lever positioned on the correct aspect of the chair, close to the bottom of the backrest. You’ll hear a click on when the mechanism is disengaged. As soon as disengaged, the chair might be moved again to the upright place.
Utilizing the Armrests
The armrests on the Tommy Bahama chair are adjustable to offer further consolation and help. To regulate the armrests, merely push down on the button positioned on the within of every armrest and transfer the armrests to the specified place.
Storing the Chair
When not in use, the Tommy Bahama chair might be simply saved away. To retailer the chair, merely fold it in half and safe it with the Velcro strap offered.
Submit-Upkeep Care
As soon as you’ve got adopted the steps above to shut your Tommy Bahama chair, it is essential to take correct care to make sure its longevity and forestall any injury.
Storage
Retailer the chair in a dry, well-ventilated space away from direct daylight. Keep away from storing it in damp or humid environments, as this may result in mould or mildew development.
Cleansing
Repeatedly clear the chair with a delicate, damp fabric. Keep away from utilizing harsh chemical compounds or detergents, as these can injury the material or body.
Tightening
Over time, the bolts and screws on the chair might grow to be unfastened. Periodically test them for tightness and alter as needed.
Lubrication
If the chair’s shifting elements grow to be stiff, you possibly can apply a small quantity of lubricant to the joints. Use a lubricant particularly designed for outside furnishings.
Safety
To guard the chair from the weather, take into account masking it with a furnishings cowl when it is not in use. It will protect it from solar, rain, and mud.
Repairs
If the chair sustains any injury, reminiscent of a torn material or a damaged body, get it repaired promptly. It will stop additional deterioration and guarantee your chair stays in good situation.
Common Inspection
Repeatedly examine the chair for any indicators of wear and tear or injury. By addressing minor points early on, you possibly can stop them from turning into extra vital and expensive.
Guarantee
Most Tommy Bahama chairs include a guaranty. Confer with the producer’s guarantee info for particulars on protection and procedures for submitting a declare.
Extra Care
For optimum care, keep away from leaving the chair uncovered to excessive temperatures or extended intervals of rain or snow. If the chair will get moist, dry it totally earlier than storing it.
| Upkeep Activity | Frequency |
|---|---|
| Cleansing | Repeatedly |
| Tightening | Periodically |
| Lubrication | As wanted |
| Safety | When not in use |
| Repairs | Promptly |
How To Shut A Tommy Bahama Chair
To shut a Tommy Bahama chair, comply with these steps:
- Find the 2 launch levers on the edges of the chair.
- Squeeze the discharge levers collectively.
- Fold the chair in half.
- Safe the chair closed by hooking the latch on the underside of the chair onto the hook on the highest of the chair.
As soon as the chair is closed, it may be saved or transported simply.
Folks Additionally Ask About How To Shut A Tommy Bahama Chair
How To Open A Tommy Bahama Chair?
To open a Tommy Bahama chair, comply with these steps:
- Find the latch on the underside of the chair.
- Unhook the latch from the hook on the highest of the chair.
- Unfold the chair.
- Lock the chair open by squeezing the discharge levers on the edges of the chair collectively.
As soon as the chair is open, it’s prepared for use.
How To Clear A Tommy Bahama Chair?
To scrub a Tommy Bahama chair, comply with these steps:
- Use a delicate fabric dampened with water to wipe down the chair.
- For harder stains, use a light cleaning soap and water resolution.
- Rinse the chair with clear water.
- Permit the chair to air dry.
Don’t use harsh chemical compounds or abrasive cleaners on the chair, as this will likely injury the end.
How To Retailer A Tommy Bahama Chair?
To retailer a Tommy Bahama chair, comply with these steps:
- Shut the chair in response to the steps outlined above.
- Retailer the chair in a dry, cool place.
- Cowl the chair with a tarp or plastic bag to guard it from mud and dust.
By following the following pointers, you possibly can maintain your Tommy Bahama chair wanting its greatest for years to return.
