The Honda Silverwing is a well-liked maxi-scooter that has been in manufacturing since 2001. It’s recognized for its snug journey, ample cupboard space, and highly effective engine. Nevertheless, like all automobiles, the Silverwing requires occasional upkeep, and one of the widespread duties is changing the gas pump. Whereas this may occasionally seem to be a frightening job, it’s truly fairly easy and will be accomplished in a couple of hours with the precise instruments and a bit of little bit of know-how.
Step one is to take away the seat and the facet panels. This provides you with entry to the gas tank and the gas pump. After getting entry to the gas pump, you’ll need to disconnect the gas strains and {the electrical} connector. As soon as the gas pump is disconnected, you may take away it from the gas tank. Watch out to not injury the gas pump or the gas tank when eradicating it.
After getting eliminated the gas pump, you may examine it for injury. If the gas pump is broken, it should have to be changed. If the gas pump will not be broken, you may clear it and reinstall it. To wash the gas pump, you should use a carburetor cleaner or a light detergent. As soon as the gas pump is clear, you may reinstall it within the gas tank. Make sure to join the gas strains and {the electrical} connector earlier than reinstalling the gas pump. As soon as the gas pump is reinstalled, you may substitute the facet panels and the seat.
Figuring out the Location of the Gasoline Pump
The gas pump in a Honda Silverwing is situated beneath the gas tank, making it accessible for inspection and alternative. Listed here are detailed steps on easy methods to establish the placement:
- Take away the Seat: Find the seat launch lever beneath the entrance of the seat and pull it as much as launch the seat. Carry the seat and set it apart.
- Find the Gasoline Tank: The gas tank is the massive, silver part positioned above the engine. It has a gas line and wiring harness related to it.
- Disconnect Gasoline Line and Wiring: Rigorously disconnect the gas line and electrical wiring from the gas tank.
Use a wrench to loosen the gas line nut and pull the gas line off the tank. For {the electrical} wiring, find the connector and press the discharge tab to disconnect it. - Take away the Gasoline Tank: Grip the gas tank on each side and carry it straight up. Watch out to not spill any gas throughout this course of.
- Find the Gasoline Pump: As soon as the gas tank is eliminated, you will notice the gas pump meeting on the underside of the gas tank. It’s usually a cylindrical or square-shaped part with gas strains and electrical connectors hooked up to it.
| Merchandise | Description |
|---|---|
| Gasoline Tank | The big, silver part situated above the engine |
| Gasoline Pump | The cylindrical or square-shaped part situated on the underside of the gas tank |
| Gasoline Line | The hose that connects the gas pump to the gas tank |
| Electrical Wiring | The wires that join the gas pump to {the electrical} system |
Making ready the Bike for Upkeep
Security Precautions
Earlier than starting any upkeep, guarantee your security by carrying correct protecting gear and dealing in a well-ventilated space. Enable the engine to chill utterly to forestall burns.
Instruments and Supplies Required
- Socket wrench set
- Screwdriver set
- Funnel
- Drain pan
Detailed Directions for Eradicating the Gasoline Pump
To entry the gas pump, comply with these steps:
1. Disconnect the Battery
Find the battery and disconnect the detrimental terminal to forestall electrical hazards.
2. Take away the Gasoline Tank
Unscrew the gas tank mounting bolts and punctiliously carry the tank off the bike. Help the tank with a stand or place heavy objects round it to forestall tipping. Use this chance to examine the gas strains and connections for any injury or leaks.
| Gasoline Tank Mounting Bolt Location | Bolt Elimination Approach |
|---|---|
| Beneath the tank, close to the seat | Use a socket wrench to loosen the bolts |
| Beside the gas cap | Use a screwdriver to take away the bolts |
3. Find the Gasoline Pump
With the gas tank eliminated, you will notice the gas pump meeting mounted on the left facet of the engine. It’s usually coated by a protecting cowl or housing.
Disassembly of the Rear Fairings
1. Begin by eradicating the rearmost seat part. That is normally held in place by a few bolts, which will be loosened with a socket wrench. As soon as the bolts are eliminated, carry the seat part off and set it apart.
2. Now, take away the rear facet fairings. These are usually held in place by a mixture of bolts and clips. First, take away the bolts which can be seen alongside the highest and sides of the fairings. Then, fastidiously pry the fairings away from the bike, beginning on the backside and dealing your approach up. Watch out to not injury the fairings or the clips that maintain them in place.
3. Eradicating the Gasoline Pump Cowl
3. As soon as the facet fairings are eliminated, you will notice the gas pump cowl. It is a black plastic cowl that’s situated on the left facet of the bike, slightly below the gas tank. To take away the quilt, you’ll need to take away the 4 bolts that maintain it in place. These bolts are situated on the highest and backside of the quilt.
As soon as the bolts are eliminated, fastidiously carry the quilt off and set it apart. You’ll now have entry to the gas pump.
| Bolt Dimension | Location |
|---|---|
| 8mm | Prime of canopy |
| 10mm | Backside of canopy |
Elimination of the Airbox and Throttle Our bodies
**1. Disconnect the battery.** That is at all times step one when engaged on any electrical part in your bike. Find the detrimental battery terminal and loosen the nut that secures the cable. Take away the cable from the terminal.
**2. Take away the seat.** The seat is held in place by two bolts on the rear of the seat. Loosen the bolts and carry the seat off of the bike.
**3. Take away the airbox cowl.** The airbox cowl is situated on the entrance of the airbox. It’s held in place by 4 bolts. Take away the bolts and carry the quilt off of the airbox.
**4. Take away the airbox.** The airbox is held in place by 4 bolts. Take away the bolts and carry the airbox out of the bike. It’s possible you’ll must disconnect the air consumption hose from the airbox to be able to take away it.
a. Disconnect the throttle cables from the throttle our bodies.
b. Take away the bolts that safe the throttle our bodies to the consumption manifold.
c. Rigorously carry the throttle our bodies off of the consumption manifold. Watch out to not injury the throttle place sensor or the injector.
**5. Take away the throttle our bodies.** The throttle our bodies are held in place by 4 bolts. Take away the bolts and carry the throttle our bodies off of the consumption manifold.
Disconnecting the Gasoline Strains
As soon as the gas tank is eliminated, you’ll need to disconnect the gas strains from the gas pump. There are two gas strains related to the gas pump: the provision line and the return line. The provision line is the bigger of the 2 strains and is related to the highest of the gas pump. The return line is the smaller of the 2 strains and is related to the underside of the gas pump.
To disconnect the gas strains, use a pair of pliers to squeeze the discharge tabs on the gas line connectors. As soon as the discharge tabs are squeezed, pull the gas line connectors off of the gas pump. Watch out to not injury the gas strains or the gas pump when disconnecting the gas strains.
As soon as the gas strains are disconnected, you may take away the gas pump from the bike.
Relieving Gasoline Strain
Earlier than disconnecting the gas strains, it is very important relieve the gas stress within the gas system. To do that, begin the engine and let it idle for a couple of minutes. Then, flip off the engine and disconnect the detrimental battery terminal.
Security Precautions
When engaged on the gas system, it is very important take the next security precautions:
- Work in a well-ventilated space.
- Put on eye safety and gloves.
- Don’t smoke or work close to open flames.
- Have a hearth extinguisher close by.
Elements Identification
The next desk identifies the elements of the gas pump and gas strains:
| Half | Description |
|---|---|
| Gasoline pump | The gas pump is a small, electrical pump that provides gas to the engine. |
| Provide line | The provision line is the bigger of the 2 gas strains and is related to the highest of the gas pump. |
| Return line | The return line is the smaller of the 2 gas strains and is related to the underside of the gas pump. |
Detaching the Gasoline Tank
To entry the gas pump, you need to first detach the gas tank. Observe these steps:
- Disconnect the gas line from the tank. It’s possible you’ll want a pair of pliers to loosen the hose clamp.
- Find the gas tank bolts, usually situated on the edges and entrance of the tank.
- Take away the gas tank bolts utilizing a socket wrench.
- Rigorously carry the gas tank up and away from the bike.
- Set the gas tank apart in a secure place.
- Disconnect {the electrical} connectors from the gas pump. There could also be a number of connectors, so you’ll want to disconnect all of them.
Eradicating the Gasoline Pump
- Find the gas pump mounting bolts, usually situated on the underside of the gas pump.
- Take away the gas pump mounting bolts utilizing a socket wrench.
- Gently pull the gas pump out of the tank.
- Examine the gas pump for any injury or particles.
- If essential, substitute the gas pump with a brand new one.
- Reinstall the gas pump within the reverse order of removing.
After getting changed or inspected the gas pump, you may reattach the gas tank by following the steps in reverse order.
Inspecting the Gasoline Pump Location
Finding the gas pump on a Honda Silverwing requires a radical inspection of the gas system. This is an in depth information on easy methods to proceed:
1. Security Precautions
Earlier than commencing any work, make sure the automobile is parked on a steady floor and the engine is turned off.
2. Find the Gasoline Tank
Determine the gas tank, which is often located beneath the rider’s seat. Take away any panels or bolts that safe it to entry the gas pump.
3. Disconnect the Gasoline Strains
Find and disconnect the gas strains related to the gas pump. Use warning as gas might spill.
4. Take away the Gasoline Pump Meeting
Unscrew the bolts or clips holding the gas pump meeting in place. Rigorously carry the meeting out of the gas tank.
5. Examine the Gasoline Pump
Study the gas pump for any seen injury or corrosion. Confirm its electrical connections and guarantee they’re safe.
6. Check the Gasoline Pump
If doable, join the gas pump to an influence supply and take a look at its performance by listening for a buzzing sound or observing gas circulate.
7. Examine the Gasoline Filter (Non-obligatory)
Many Honda Silverwing fashions have an inline gas filter situated close to the gas pump. Examine the filter for clogs or particles and substitute it if essential.
| Gasoline Filter Inspection Steps: |
|---|
| – Disconnect the gas filter from the gas strains. |
| – Examine for dust or particles contained in the filter. |
| – Use compressed air or a gas injector cleaner to scrub the filter. |
| – If the filter is clogged or broken, substitute it with a brand new one. |
Reconnecting Parts
After changing the gas pump, it is time to reconnect the varied elements you disconnected earlier. Begin by reattaching the gas pump to the gas tank. Use the bolts you eliminated earlier to safe it in place. As soon as the gas pump is in place, reconnect the gas strains. Be sure the strains are securely hooked up and there are not any leaks. Subsequent, reconnect {the electrical} connectors to the gas pump. Lastly, reattach the seat and another elements you eliminated throughout the course of.
8. Reattaching the Gasoline Tank
When reattaching the gas tank, you’ll want to use a brand new gasket to make sure a correct seal. Begin by aligning the tank over the body after which fastidiously decrease it into place. As soon as the tank is in place, safe it with the bolts you eliminated earlier. Subsequent, reconnect the gas strains and electrical connectors to the tank. Lastly, reattach the seat and another elements you eliminated throughout the course of.
Further Ideas
Listed here are some further ideas for changing the gas pump:
- Use a clear work space to keep away from contaminating the brand new gas pump.
- Take your time and comply with the directions fastidiously.
- Should you’re not snug working in your automobile, do not hesitate to take it to a certified mechanic.
Testing the Gasoline Pump Operation
To check the gas pump operation, you’ll need a multimeter and a jumper wire.
- Disconnect the detrimental battery terminal.
- Find the gas pump relay.
- Take away the gas pump relay from its socket.
- Join one finish of the jumper wire to the constructive terminal of the battery.
- Join the opposite finish of the jumper wire to the terminal on the gas pump relay that’s related to the gas pump.
- Flip the ignition key to the “on” place.
- Hear for the gas pump to run.
- If the gas pump doesn’t run, test the fuse for the gas pump.
- If the fuse is sweet, substitute the gas pump.
Further Troubleshooting Ideas
| Symptom | Doable Trigger | Resolution |
|---|---|---|
| Engine begins and runs for a couple of seconds, then dies | Gasoline pump will not be delivering sufficient gas | Change the gas pump |
| Engine begins and runs, however hesitates or stalls beneath load | Gasoline pump will not be delivering sufficient gas | Change the gas pump |
| Engine doesn’t begin | Gasoline pump will not be delivering any gas | Examine the gas pump fuse. If the fuse is sweet, substitute the gas pump |
Honda Silverwing: Accessing the Gasoline Pump With out Elimination
Accessing the gas pump on a Honda Silverwing requires some mechanical information and the precise instruments.
To start, find the gas tank launch lever and carry the tank to show the gas strains and electrical connectors. Disconnect these elements fastidiously.
Subsequent, establish the gas filter, which is situated close to the underside of the gas tank. Disconnect the gas strains from the filter and take away the filter meeting.
With the gas filter eliminated, you’ll have entry to the gas pump. The pump is held in place by a sequence of bolts or screws. Rigorously take away these fasteners and carry the gas pump out of the tank.
When changing the gas pump, you’ll want to use a brand new gasket or O-ring to make sure a correct seal. Tighten the bolts or screws securely and reconnect the gas strains and electrical connectors.
Lastly, decrease the gas tank again into place and reconnect the gas tank launch lever.
Folks Additionally Ask
How troublesome is it to alter the gas pump on a Honda Silverwing?
The issue of adjusting the gas pump on a Honda Silverwing is dependent upon your mechanical expertise and expertise. If you’re not snug working by yourself bike, it’s best to depart it to knowledgeable mechanic.
What instruments do I would like to alter the gas pump on a Honda Silverwing?
You’ll need a set of screwdrivers, a wrench, and a pair of pliers to alter the gas pump on a Honda Silverwing. You may additionally want a gas filter wrench to take away the gas filter.
Can I exploit any gas pump for my Honda Silverwing?
No, you need to solely use a gas pump that’s particularly designed to your specific mannequin of Honda Silverwing. Utilizing the flawed gas pump can injury your bike.
