Featured Picture:
Nest thermostats are a well-liked selection for householders trying to improve their residence’s heating and cooling system. They’re simple to make use of, environment friendly, and may prevent cash in your power payments. However what if it’s essential to take away your Nest thermostat? Perhaps you are transferring, or possibly it’s essential to substitute your thermostat for one more motive. Regardless of the motive, eradicating your Nest thermostat is a comparatively easy course of. Here is a step-by-step information on find out how to do it.
Earlier than you begin, you will want to assemble a number of instruments. You may want a screwdriver, a pair of pliers, electrical tape, and a degree. After getting your instruments, you are prepared to start the elimination course of. First, flip off the ability to your thermostat on the circuit breaker panel. Subsequent, take away the faceplate of your thermostat by gently pulling it away from the wall. Now, you can entry the wires which might be linked to your thermostat. Word the place of every wire earlier than disconnecting them. As soon as the wires are disconnected, you’ll be able to take away the thermostat from the wall. To do that, merely unscrew the 2 screws which might be holding it in place.
Now that your thermostat is eliminated, you’ll be able to set up your new thermostat. To do that, merely comply with the directions that got here along with your new thermostat. As soon as your new thermostat is put in, you’ll be able to flip the ability again on on the circuit breaker panel. Your new thermostat ought to now be working correctly. You probably have any issues, seek the advice of the directions that got here along with your new thermostat or contact a professional electrician.
Detaching the Faceplate
To take away the Nest Thermostat, you could first detach the faceplate from the bottom. Here is a step-by-step information on find out how to do it:
- Establish the small launch button: The faceplate of the Nest Thermostat has a small launch button positioned on the backside middle. It is a tiny, round button, barely noticeable in opposition to the faceplate.
- Press and maintain the discharge button: Use your fingernail, a pen, or any skinny object to press and maintain down the discharge button. You must really feel a slight click on or resistance when it is correctly engaged.
- Gently pull the faceplate away: Whereas holding down the discharge button, fastidiously pull the faceplate straight towards you. It ought to detach from the bottom with a slight tug. Be mild and keep away from twisting or bending the faceplate.
- Launch the discharge button: As soon as the faceplate is indifferent, you’ll be able to launch the discharge button. The faceplate is now free from the bottom, revealing the thermostat’s wiring and terminal connections.
Warning: Don’t pry or drive the faceplate off. If it does not come off simply, verify that you just’re holding down the discharge button correctly. Extreme drive can injury the thermostat.
Disconnecting the Wiring
To soundly take away your Nest Thermostat, it’s important to disconnect the wiring first. Here is an in depth information that will help you via this step:
Establish the Wires
Earlier than disconnecting something, take a second to determine the wires linked to the thermostat. They’ll usually be color-coded, and their corresponding terminals shall be labeled. Word down the wire shade and its matching terminal, as you’ll need this data when reconnecting the thermostat later.
Flip Off the Energy
For security causes, flip off the ability to the thermostat from the breaker panel. It will minimize off {the electrical} provide to the thermostat, stopping any electrical shocks or brief circuits.
Take away the Faceplate
Find the faceplate of the thermostat and gently pull it away from the bottom. It will expose the wiring terminals and the wires linked to them.
Disconnect the Wires
Utilizing a small screwdriver or needle-nose pliers, fastidiously launch the wires from their terminals. Be mild and keep away from utilizing extreme drive, as this might injury the wires or the thermostat. As soon as all of the wires have been disconnected, you’ll be able to take away the thermostat base from the wall.
| Wire Coloration | Terminal |
|---|---|
| Crimson | R |
| Blue | C |
| Inexperienced | G |
| Yellow | Y |
| Black | W |
Unscrewing the Baseplate
Lastly, it is time to unscrew the baseplate. That is the steel plate that the thermostat is mounted on. To take away it, you will want to make use of a screwdriver to loosen the 2 screws which might be positioned on both facet of the thermostat. As soon as the screws are free, you must be capable to pull the baseplate straight off the wall. If the baseplate is caught, you’ll be able to strive utilizing a putty knife to softly pry it off.
As soon as the baseplate is eliminated, you will must disconnect the wires which might be linked to the thermostat. To do that, merely pull the wires straight out of the terminals. As soon as the wires are disconnected, you’ll be able to take away the thermostat from the wall.
Here is a extra detailed information to unscrewing the baseplate:
- Find the 2 screws on both facet of the thermostat. These screws are positioned close to the underside of the thermostat, and they’re usually lined by a small plastic cap.
- Use a screwdriver to loosen the screws. Watch out to not overtighten the screws, as this might injury the thermostat.
- As soon as the screws are free, pull the baseplate straight off the wall. If the baseplate is caught, you’ll be able to strive utilizing a putty knife to softly pry it off.
| Step | Directions |
|---|---|
| 1 | Find the 2 screws on both facet of the thermostat. |
| 2 | Use a screwdriver to loosen the screws. |
| 3 | As soon as the screws are free, pull the baseplate straight off the wall. |
Eradicating the Thermostat from the Wall
1. Flip off the ability to the thermostat. This may be completed by flipping the breaker that controls the thermostat or by eradicating the batteries from the thermostat.
2. Take away the faceplate of the thermostat. To do that, gently pry the faceplate off of the thermostat with a flathead screwdriver or a putty knife.
3. Disconnect the wires from the thermostat. There are often 4 wires which might be linked to the thermostat: a pink wire, a white wire, a inexperienced wire, and a yellow wire. To disconnect the wires, merely unscrew the screws which might be holding them in place.
4. Take away the thermostat from the wall. As soon as the wires are disconnected, you’ll be able to take away the thermostat from the wall. To do that, merely pull the thermostat straight off of the wall.
Word: If the thermostat is connected to the wall with screws, you’ll need to take away the screws earlier than you’ll be able to take away the thermostat.
| Wire Coloration | Function |
|---|---|
| Crimson | Energy |
| White | Heating |
| Inexperienced | Cooling |
| Yellow | Fan |
5. Wrap the wires with electrical tape. As soon as the thermostat is faraway from the wall, you must wrap the wires with electrical tape to stop them from shorting out.
6. Retailer the thermostat in a secure place. As soon as the thermostat is faraway from the wall, you must retailer it in a secure place till you might be prepared to put in it once more.
Putting in the New Thermostat
After getting eliminated your Nest thermostat, it is time to set up the brand new one. Listed below are the steps on find out how to do it:
- Flip off the ability to your thermostat by turning off the breaker or fuse that controls it.
- Take away the previous thermostat faceplate by gently pulling it off the wall.
- Disconnect the wires from the previous thermostat. Make sure that to label every wire so you recognize the place it goes whenever you join the brand new thermostat.
- Mount the brand new thermostat baseplate to the wall.
- Join the wires to the brand new thermostat. Make sure that to attach the wires to the proper terminals on the thermostat. Here’s a desk with the frequent wire colours and their corresponding terminals:
Wire Coloration Terminal Crimson R White W Inexperienced G Yellow Y Blue C - Connect the thermostat faceplate to the baseplate.
- Activate the ability to your thermostat.
- Set the time and date in your thermostat.
- Check your thermostat to ensure it is working correctly.
- Step 1: Establish the Wires
- Step 2: Join the Wires
- Step 3: Confirm Connections
- Step 4: Mount the Thermostat
- Step 5: Flip On the Thermostat
- Step 6: Troubleshooting Frequent Wiring Points
-
Align the faceplate: Place the faceplate over the thermostat base, making certain that the small magnets on the faceplate align with their corresponding slots on the bottom.
-
Apply mild stress: Evenly press on the faceplate till you’re feeling it snap into place. Keep away from urgent too onerous, as you would possibly injury the magnets.
-
Examine for gaps: Examine the sides of the faceplate to make sure that there aren’t any gaps or misalignments. In case you discover any gaps, gently alter the faceplate till they disappear.
-
Safe the screws: Find the 2 small screws on the perimeters of the faceplate. Utilizing a Phillips-head screwdriver, tighten these screws to safe the faceplate firmly.
-
Change the duvet: If the thermostat has a canopy plate, place it over the secured faceplate and press gently till it snaps into place.
-
Activate the thermostat: Press the button on the thermostat base or faceplate to show it on.
-
Check the thermostat: As soon as the thermostat is turned on, verify if it is functioning accurately by adjusting the temperature and observing if it responds accordingly. If the thermostat doesn’t reply or exhibits any errors, fastidiously detach the faceplate once more and reverify all connections.
- Use a flathead screwdriver to softly pry the thermostat base plate away from the wall plate.
- Watch out to not injury the thermostat or the wall.
- As soon as the bottom plate is indifferent, you’ll be able to disconnect the wires and take away the thermostat.
- Flip off the ability to the thermostat on the circuit breaker.
- Watch out to not contact any naked wires.
- If you’re utilizing a ladder, be certain it’s secure and safe.
- Don’t try and take away the thermostat whether it is nonetheless scorching.
- Don’t use any instruments that would injury the thermostat or the encompassing wall.
- You probably have any questions, please seek the advice of the Nest Assist web site or name Nest customer support.
- Press and maintain the Again button for five seconds.
- Choose Settings.
- Choose Reset.
- Choose Sure.
- Flip off the ability to the thermostat on the breaker panel.
- Gently pull the thermostat straight off the wall plate.
- Disconnect the wires from the thermostat terminals.
- Take away the mounting plate from the wall.
Reconnecting the Wiring
As soon as the Nest Thermostat has been eliminated, it is time to reconnect the wiring to the baseplate or sub-base. Here is an in depth information on find out how to do it:
Consult with the label on every wire to determine which terminal it belongs to. Frequent terminals are Y (yellow), W (white), G (inexperienced), R (pink), C (frequent), and RC (energy). If there isn’t any label, it’s possible you’ll must seek the advice of the wiring diagram supplied by your HVAC system producer.
Insert every wire into the corresponding terminal on the baseplate or sub-base. Be certain that the wire is totally inserted and tightened securely with a screwdriver. Don’t overtighten the screws, as this might injury the terminals.
Use a multimeter to confirm that the wires have been linked accurately. Flip the ability again on to the HVAC system and verify if the thermostat is working correctly. If there are any points, double-check the connections and be sure that the wires aren’t touching one another.
As soon as the wiring has been verified, mount the thermostat again onto the baseplate or sub-base. Align the mounting screws and tighten them securely. Make sure that the thermostat is degree and aligned correctly.
Activate the HVAC system and await the thermostat to energy up. The display ought to show the preliminary setup directions. Observe the on-screen prompts to finish the setup and configure your thermostat settings.
| Problem | Potential Causes and Options |
|---|---|
| Thermostat Not Turning On | – Wiring not linked accurately – Confirm wire connections and guarantee they’re safe. – Energy not equipped to the thermostat – Examine if the ability is turned on on the circuit breaker or fuse field. – C wire not linked – In case your system requires a C wire to energy the thermostat, guarantee it’s linked to the C terminal. |
| Incorrect Temperature Readings | – Sensor malfunction – Contact Nest help for help. – Incorrect wire connections – Confirm wire connections and make sure the Y and C wires are linked to the proper terminals. – Defective HVAC system – Have a professional HVAC technician examine and restore the system. |
| Fan Not Working | – G wire not linked – Make sure the G wire is linked to the G terminal. – Defective wiring or fan motor – Contact an HVAC technician for additional troubleshooting. – System settings not configured accurately – Examine the thermostat settings and be sure that the fan is ready to run as desired. |
Reattaching the Faceplate
With the thermostat faceplate indifferent, you will must fastidiously reattach it to make sure that the thermostat operates correctly. Here is find out how to do it:
Unmount the Thermostat
1. Flip off the ability to the thermostat by flipping the breaker or eradicating the fuse.
2. Grip the thermostat’s base plate and pull it straight towards you to detach it from the wall plate.
3. Disconnect the wires by gently squeezing the connectors and pulling them away from the terminals.
4. Take away the wall plate by unscrewing the mounting screws.
Reset the Thermostat
If the thermostat is malfunctioning, it’s possible you’ll must reset it.
1. Press and maintain the reset button for five seconds.
2. Launch the button and await the thermostat to restart.
Troubleshooting Frequent Points
If you’re having bother eradicating the thermostat, listed below are some frequent points and their options:
8. Thermostat is caught
If the thermostat is caught and will not detach from the wall plate, strive these steps:
| Problem | Answer |
|---|---|
| Thermostat is frozen | Anticipate the thermostat to thaw after which attempt to take away it. |
| Thermostat is connected to a sub-base | Take away the sub-base earlier than detaching the thermostat. |
| Wires are caught | Use a small screwdriver to softly pry the wires out of the terminals. |
Security Precautions
It is very important be aware {that electrical} work may be harmful. If you’re not comfy working with electrical energy, it’s best to seek the advice of a professional electrician. Listed below are some security precautions to remember:
Step 9: Disconnecting the Wires
As soon as the thermostat has been faraway from the wall, it’s time to disconnect the wires. There are 5 wires that must be disconnected. The wires are color-coded, so you will need to make a remark of which wire goes the place. Here’s a desk with the wire colours and their corresponding terminals:
| Wire Coloration | Terminal |
|---|---|
| Crimson | R |
| Inexperienced | G |
| White | W |
| Yellow | Y |
| Blue | C |
To disconnect the wires, merely pull them straight out of the terminals. Watch out to not injury the wires or the terminals.
10. Resetting the Thermostat to Manufacturing unit Settings
In some instances, it’s possible you’ll must reset the Nest thermostat to its manufacturing facility settings. That is helpful in the event you’re experiencing any points with the machine or in the event you’re promoting it. To reset the thermostat to manufacturing facility settings, comply with these steps:
The thermostat will then reset to manufacturing facility settings and restart. You have to to arrange the thermostat once more from scratch.
Here is a abstract of the steps to take away a Nest thermostat in a desk format:
| Step | Directions |
|---|---|
| 1 | Flip off the ability to the thermostat. |
| 2 | Take away the faceplate from the thermostat. |
| 3 | Disconnect the wires from the thermostat. |
| 4 | Take away the baseplate from the wall. |
| 5 | Set up the brand new thermostat. |
| 6 | Join the wires to the brand new thermostat. |
| 7 | Set up the faceplate on the brand new thermostat. |
| 8 | Restore energy to the thermostat. |
| 9 | Confirm that the brand new thermostat is working correctly. |
| 10 | Reset the previous thermostat to manufacturing facility settings (non-obligatory). |
The way to Take away a Nest Thermostat
Eradicating a Nest thermostat is a comparatively easy course of that may be accomplished in a couple of minutes. Listed below are the steps on find out how to do it:
As soon as the thermostat is eliminated, you’ll be able to set up a brand new one or just depart the wires disconnected.
